Secondary equipment SKB PRIBORY' i SISTEMY' Sapphire, BPI, BPS-96PR, etc.

• The HART modem (hereinafter referred to as the modem) is designed for the coordination (communication) of a personal computer or automated process control systems and pressure sensors Sapphire-22MPS, level converters Sapphire-22MP-Du and other devices that support the HART protocol. The explosion-proof modem can be used with sensors installed in explosive zones in which the formation of explosive mixtures of gases, vapors, flammable liquids with air is possible. In this case, the modem is installed in explosion-proof rooms, but from the side of connection to the sensors. The modem has a particularly explosion-proof level provided by the type of explosion protection according to GOST R 51330.10 "intrinsically safe electrical circuit" (ia) marked "[Exia] IIC". In terms of resistance to climatic influences, the modem complies with the UHL3.1 version according to GOST 15150, but for operation at ambient temperatures from 0 to plus 50 0C and a relative humidity of 80% at a temperature of 35 ° C. In terms of resistance to mechanical influences, the modem has a vibration-resistant version R-VI according to GOST R52931.The degree of protection of the modem from dust and water penetration is IP30 according to GOST 14254. According to metrological properties, the modem is not a measuring instrument.

• EXAMPLE OF AN ENTRY WHEN ORDERING

• The BPI power supply is designed to supply a stabilized DC voltage of 36 V to various electronic devices. The power supply is available in 1-, 2-, 3-, 4- It is designed for operation in explosion-proof rooms and is made in the climatic version of UHL4 according to GOST 15150.

• EXAMPLE OF AN ENTRY WHEN ORDERING

• Signal conversion units BPS-96PR are designed for use in control systems, control and regulation of technological processes of explosive industries. The units provide electrical power to measuring transducers (such as Sapphire, UB-EM, Metran, Metran-150, etc.) via a two-wire or four-wire communication line that simultaneously carries information about the measured parameter in the form of a standard current signal of 0-5 mA, 0-20 mA or 4-20 mA. The blocks allow converting the information signal from the converter from levels 0-5 mA, 0-20 mA or 4-20 mA to levels 0-5 mA, 0-20 mA or 4-20 mA. The units signal the deviation of the output signal from the two (lower and upper) set limit values of the measured parameter in the form of a light indication on the front panel (cover) and relay output signals. The BPS-96PR-P blocks have a proportional (linear) static characteristic. The BPS-96PR-K blocks have a root-and-branch statistical characteristic.

• EXAMPLE OF AN ENTRY WHEN ORDERING

• The diaphragms of the DCS type by standard sizes are manufactured in accordance with GOST 8.563.1-3. The diaphragms are supplied with annular chambers. Ring chambers are made of steel 20 GOST 1050 (symbol "a"), or of steel 12X18N10T GOST 5632 (symbol "b"). The diaphragm is made of steel 12X18N10T (symbol "b"), or of steel 10X17N13M2T GOST 5632 (conditional designation "b"). Chamber diaphragms are manufactured for a nominal pressure of Ru = 0.6 MPa (6 kgf / cm2) and Ru = 10 MPa (100 kgf / cm2). At the request of the consumer, the diaphragms of the DCS type can be equipped with equalizing condensation vessels, equalizing vessels, separation vessels. The diaphragms are manufactured with the calculation of the aperture diameter of the diaphragm d20 or with a preliminary hole diameter. To calculate the diameter of d20, the initial data must be attached to the order in accordance with RD50-213-80.

• EXAMPLE OF AN ENTRY WHEN ORDERING

• The universal two-channel indicator-recorder-recorder "MOBIUS-2" (hereinafter referred to as the device or recorder) is a technical computer with built-in software. The device is designed for visual observation, automatic measurement, registration, memorization, conversion of a unified current signal of 4-20 mA or 0-10 volts voltage into a specified range of temperature, pressure or level and signaling the deviation of the measured parameter from the set value with a separate task for each channel with an accuracy of 0.15%.

• EXAMPLE OF AN ENTRY WHEN ORDERING

• Designed to protect the inner cavity of the sensitive elements of measuring devices from ingress of aggressive, hot, crystallizing, suspended solids-bearing media into it.

• It is intended for heating elements of the level meters Sapphire-22MP-DU, Sapphire-22MP1-DU, UB-EM1, URB-P, URB-PM and PIUP, in which moisture condensate in the form of ice or frost forms at negative ambient temperatures, preventing normal functioning. The ESd-1M heater can also be used for local heating of various sections of technological pipelines, for example, in the locations of valves, valves, etc.

• EXAMPLE OF AN ENTRY WHEN ORDERING

• Designed to ensure the intrinsic safety of circuits of electric contact pressure gauges, thermometers, etc. devices and products with switching contacts and operating without the use of electricity, for example: SUG-M, ROS-400, DRU-1PM, as well as for use in fire alarm systems and automatic fire extinguishing devices.

• EXAMPLE OF AN ENTRY WHEN ORDERING

• Purpose: replacement of obsolete analog electronic units of the "Sapphire 22, Sapphire 22M, Sapphire 22R" converters with new microprocessor boards in order to restore the operability of the "Sapphire 22" devices.

• It is designed to display the information of the main pressure, level or temperature sensor and is located in a place convenient for the consumer.

Online Selection